• Production Machining Center

Production Machining Center - RMV700APC

Features :

RMV-APC series: For light chips, non-ferrous metal, composite material

    RMV500APC RMV700APC
CONTROL SYSTEM   AKIRA M:845 / (FANUC G code compatible)
TRAVEL  
X Axis Travel mm/inch 500 /19.69 700 / 27.56
Y Axis Travel mm/inch 300 / 11.81 400 /15.75
Z Axis Travel mm/inch 280 / 11.02 400 / 15.75
Spindle Nose to Table Surface mm/inch 150~ 430 / 5.91~16.93 200~ 600 / 7.87~23.6
TABLE / PALLET  
Table size (L x W) mm/inch 500 x 300 /
19.69 x 11.81
700 x 400//
27.56 x 15.75
Max. Loading Capacity kgs/lb 100 / 220.46 160 / 352.74
SPINDLE SYSTEM  
Spindle Motor Output (Peak) HP 6 (Acceleration: 20 HP) 12 (Acceleration: 15 HP)
Spindle Max. Speed rpm 15,000 (STD)
24,000 (OPT)
12,000 (STD)
15,000 (OPT)
Spindle Taper - BT30 / HSK40A (OPT) BT40 / HSK63 (OPT)
Method of Spindle Cooling - Air Cooling Air Cooling
FEED  
Rapid Feed X/Y/Z M/min ipm 60 /60 / 72
2362 / 2362 / 2834
48 /60 / 72
1889/ 2362 / 2834
Cutting Feed X/Y/Z M/min ipm 10 / 10 / 10
394/394/394
10/10/10
394/394 / 394
ACCURACY  
Positioning mm/inch 0.012 / 0.00047 0.012 / 0.00047
Repeatability mm/inch ±0.005/ ±0.0002 ±0.005/ ±0.0002
ATC  
Tool Storage - Servo 24T+1 Servo 24T+1
Servo 40T+1 (OPT)
Max. Tool Diameter mm/inch 50 /1.97 75/2.95
Max. Tool Length mm/inch 175 / 6.89 200 / 7.87
Max. Tool Weight kgs/lbs 2.5 / 5.51 4.5 /9.92
Tool Change Time sec. T-T: 0.7
C-C:1.9
T-T: 1.9
C-C: 3.4
GENERAL  
Coolant Tank Capacity liter/gal 150 / 39.63 150 / 39.63
Power Requirement KVA 10 25
Air Pressure Requirement kgs/c㎡ 5 5
Floor Space (Wx L) mm/inch 1500 x 2777 /
59.06 x 109.33
1900 x 3144 /
74.8 x 123.78
Weight kgs/lb 4200 / 9259.41 5600 / 12345.88
Top