• Production Machining Center

Production Machining Center - RMV160RT

Features :

RMV-APC series: For light chips, non-ferrous metal, composite material

    RMV160RT RMV250RT
CONTROL SYSTEM    AKIRA M:845 / (FANUC G code compatible)
TRAVEL  
X Axis Travel mm/inch 380/14.96 500 / 19.69
Y Axis Travel mm/inch 160 / 6.3 250 /9.84
Z Axis Travel mm/inch 380 / 14.96 400 / 15.75
Spindle Nose to Table Surface mm/inch 100 ~480 / 3.94~18.9 125~525 /4.92~20.67
TABLE / PALLET  
Table size (L x W) mm/inch ∅160 ∅250
C Axis Rotation degree 360° 360°
B Axis Swing degree +30 / -120 +30 / -120
Max. Loading Capacity kgs/lb 20 /44.09 60 / 132.28
SPINDLE SYSTEM  
Spindle Motor Output (Peak) HP 6 (Acceleration: 20 HP) 12 (Acceleration: 15 HP)
Spindle Max. Speed rpm 15,000 (STD)
24,000 (OPT)
12,000 (STD)
15,000 (OPT)
Spindle Taper - BT30 / HSK40A (OPT) BT40 / HSK63 (OPT)
Method of Spindle Cooling - Air Cooling Air Cooling
Rapid Feed X/Y/Z M/min ipm 60 /60 / 72
2362 / 2362 / 2834
48 /60 / 72
1889 / 2362 / 2834
Cutting Feed X/Y/Z M/min ipm 10 / 10 / 10
394/394/394
10/10/10
394/394 / 394
ACCURACY  
Positioning mm/inch 0.012 / 0.00047 0.012 / 0.00047
Repeatability mm/inch ±0.005/ ±0.0002 ±0.005/ ±0.0002
ATC  
Tool Storage - Servo 24T+1 Servo 24T+1
Servo 40T+1 (OPT)
Max. Tool Diameter mm/inch 50 /1.97 75/2.95
Max. Tool Length mm/inch 175 / 6.89 200 / 7.87
Max. Tool Weight kgs/lbs 2.5 /5.51 4.5 /9.92
Tool Change Time sec. T-T: 0.7
C-C:1.9
T-T: 1.9
C-C: 3.4
GENERAL  
Coolant Tank Capacity liter/gal 150 /39.63 150 /39.63
Power Requirement KVA 10 25
Air Pressure Requirement kgs/c㎡ 5 5
Floor Space (Wx L) mm/inch 1600 x 2322 /
62.99 x 91.42
1900 x 2677 /
74.8 x 105.39 
Weight kgs/lb 4000/8818.48 5000 / 11023.11
Top