| NC Unit | - | AKIRA Mi845 |
| SPINDLE | Max. Motor Power (Peak) | HP | 10 |
| Max. Spindle Speed | RPM | 15,000 |
| Spindle Taper | - | BT30 |
| Method of Spindle Cooling | - | Air Cooling |
| TRAVEL | X Travel | mm | 500 | 700 |
| Y Travel | mm | 400 | 400 |
| Z Travel | mm | 330 | 330 |
| Distance from Spindle Nose to Table | mm | 180 -480 |
| TABLE | Table size | mm | 650 x 400 | 850 x 400 |
| Max. Loading | kgs | 250 | 300 |
| FEED RATE | Rapid Traverse Rate (X / Y / Z) | M / min | 40 / 40 / 40 |
| Acceleration (X / Y / Z) | G | 1.2 / 1.2 / 1.2 |
| POSITIONING ACCURACY / REPEATED POSITIONING ACCURACY | mm | 0.01 ± 0.003 |
| ATC | Tool Change System | - | Servo 21T (STD) |
| Max. Tool Diameter | mm | 50 |
| Max. Tool Length | mm | 200 |
| Max. Tool Weight | kgs | 3 |
| Tool To Tool Time (60 Hz) | sec. | T-T:1.6 |
| GENERAL | Coolant Tank Capacity | liter | 200 |
| Power Requirement | KVA | 15 |
| Air Pressure Requirement | Kgf / cm2 | 5 |
| Floor Space (W x L) | kgs | 1,560 x 2,530 | 2,100 x 2,530 |
| Weight | kgs | 2,300 | 2,500 |